Building a fence is a great way to increase your home’s curb appeal, home value and trendy definition of your yard and garden.
But you aren’t the only person who must live with the fence after it’s built. The rest of the neighbourhood, particularly the folks next door to you, will likewise experience the benefits and negatives of your choice in fencing.
Here is how to build a fence and keep the peace by mixing neighbourly concerns with factors of style and durability, presented by auckland fence builders:
Plan fence carefully
There’s nothing worse than an ongoing neighbourhood feud started by a fence built on the wrong side of a property line, so know exactly where your lines are drawn.
Check plot strategies to identify the corners of your lot and work within them. Diffuse any suspected ill intent by talking to your neighbours about your fence-building plans before you begin construction.
Make it a legal fence
Not all fencing jobs require licenses, but it’s worth checking with local officials to confirm any building parameters. Local ordinances may have strict guidelines for fence height, material selection, picket spacing, post hole footings, and minimum setback distance from the sidewalk or road.
Fence material choices
Fencing is offered in a wide selection of materials, such as natural and pressure-treated woods, composites, vinyl and metal. In addition to the look you like, consider the upkeep required by your fencing selection. Natural wood comes with the biggest ongoing demands, requiring repainting or refinishing every few years.
Good fence side out
In addition to coordinating with and enhancing your home, the style of fencing you choose should look good from both sides (the neighbourly facet of design), match the uses of your outdoor space (e.g., help to keep pets pets, and playthings within bounds), and get the most out of your lot lines (open fencing patterns make a lawn seem larger).
Fencing like board-on-board is designed to look equally great on both sides. But stockade fencing has only one finished side. If that is the type of weapon you choose, bear in mind that most building codes require that you have the GOOD side facing out.
Seal, stain and finish fence first
For optimal coverage and protection in addition to ease, make sure that you apply finish to fencing components before they are assembled. This measure should also be taken if you’re working with a professional installer. Have them fall off the fencing a few days before the scheduled instalment so you have time to look after the finish. Speaking of finish, avoid applying a clear topcoat like shellac or polyurethane varnish. It won’t have a chance against the elements, finally blistering to the point that you’ll need to sand all surfaces down and begin with a whole new finish for your fencing.
Fence gates take most of the wear-and-tear of the fence so make sure yours is securely built and fortified with diagonal cross bracing to prevent sagging. Also, to help make certain that your gate stays shut even if the kids leave it open, add a spring hinge into the fence gate allow it to swing shut.
Don’t drag fence
One common fencing installation mistake is allowing the bottom rail of a fence to hover too close to the ground. Make sure your railing sits four to six inches above floor level to provide more-than-adequate clearance for nearby grass and proper airflow. The fence will settle after installation, so keeping the fence up from the start is the best way to make sure the fence doesn’t become bait for bugs.
Space fence out
Spacing between fence posts will be dependent on the type of fence, the terrain where you are building it, and its general purpose, but the typical range is six to eight feet between posts.
Set fence posts properly
Many folks assume that placing posts in concrete is the very best and strongest way to go, but that method can lead to improper settling, drainage and damage issues. Most fences will find a better footing if post holes are lined with well-tamped gray gravel. The pressure of the gravel from the dirt is much stronger than a concrete pour, and keeps fence posts directly as the natural drainage works its magic.
Cap fence posts
Top off your fence construction project with a slant, rounded surface or metal cap to promote water runoff and protect against rot.